|
Brother DR-400 Drum Reset Instructions These instructions will help you reset your printer to 100% life of your new Brother DR-400 drum
For HL Models:
1 - Open the front cover 2 - Locate the control panel [ BUTTON ] under the led lights  3 - Press the control panel button until all the lights are lit the release the button. The drum counter is now reset. 4 - Close the door. You are ready to print. For MFC Models 1 - Open the front cover and press the [ CLEAR ] button. 2 - The screen will ask if a "New Drum Was Installed" " 1 for Yes 2 for No" 3 - Press the [ 1 ] key to select yes. 4 - The scree should respond with "selection accepted" 5 - The drum counter is now reset. Close the door. You are ready to print
|
