Brother DR-420 Drum Reset InstructionsBrother DR-420 Drum Reset Instructions
For DCP Printers:
1) Open the font cover and press the [Clear] button 2)To confirm you are installing a new drum press the up arrow. 3) When the LCD screen shows "Accepted", close the front cover.
For HL Printers:
1) Open the cover 2) Press and hold the [Go] button for 4 seconds. 3) Once all four LEDs are lit, release the [Go] Close the front cover and make sure the Drum LED is off
For Intellifax And MFC Printers:
1) Open the font cover and press the [Clear] button 2) Press 1 to confirm you are installing a new drum unit. 3) When the LCD screen shows "Accepted", close the front cover. Why the Brother DR-420 Drum and Brother TN-450 From 3R Inkjets and Toners?We focus on saving you money while giving you great value. While the original TN450 Toner offers you 2,600 pages per cartridge and the TN-420 provides 1,200 pages, our remanufactured Brother TN-450 gives you an impressive 3,000 pages per cartridge. You can also configure your print to "Continue" print mode tell the printer to not stop printing when it thinks it is out of toner. Here is how. We take apart the used Brother DR-420 and clean all the gears, charging elements, and the transfer roller. The used drum roller is replaced with a new one every time. So you will receive a new TN450 drum unit every order.
|